The MIG welder is the most common type of mig welder, using gas metal arc welding, it is really effective. A wire which is the electrode is fed through the welding gun. The same time this happens, shielding gas gets flowed which protects the weld while it is in the process of cooling down.
Carbon dioxide is most commonly used for this type of welding because it is the cheapest and it creates a great weld. Also used is Argon which creates a good mixture with carbon dioxide, and creates less spatter which means a cleaner weld overall. To get the best welds with aluminium, using argon gas alone is the best method.
Over other processes of welding the GMAW method has many advantages such as the welding gun itself which has a control on the trigger which will position the electrode without accidentally hitting one of the arcs. Once you have positioned the gun in the right place all that left to do is put your helmet on and pull the trigger.
Thinner metals and welt sheet metals are best suited for MIG welders because they can be operated at a much lower voltage than other welders. Using an alternating current will not give you a steady arc when welding which is why MIG welders use a DC current. Using inert shielding gases will make the welds smooth with no slag to chip.
You can adjust the voltage on a MIG welder as well as the amps and the speed the wire comes through to the welder. A valve control will control the flow of the gas, and the tensioner on the wire is variable as well.
You can use a mig welder without shielding gas, and this is called flux cored arc welding, FCAW. There is an option of switching the polarity of the arc for the flux cored wire. The process requires that the wire has a hollow core filled with flux for better effectiveness.
Carbon dioxide is most commonly used for this type of welding because it is the cheapest and it creates a great weld. Also used is Argon which creates a good mixture with carbon dioxide, and creates less spatter which means a cleaner weld overall. To get the best welds with aluminium, using argon gas alone is the best method.
Over other processes of welding the GMAW method has many advantages such as the welding gun itself which has a control on the trigger which will position the electrode without accidentally hitting one of the arcs. Once you have positioned the gun in the right place all that left to do is put your helmet on and pull the trigger.
Thinner metals and welt sheet metals are best suited for MIG welders because they can be operated at a much lower voltage than other welders. Using an alternating current will not give you a steady arc when welding which is why MIG welders use a DC current. Using inert shielding gases will make the welds smooth with no slag to chip.
You can adjust the voltage on a MIG welder as well as the amps and the speed the wire comes through to the welder. A valve control will control the flow of the gas, and the tensioner on the wire is variable as well.
You can use a mig welder without shielding gas, and this is called flux cored arc welding, FCAW. There is an option of switching the polarity of the arc for the flux cored wire. The process requires that the wire has a hollow core filled with flux for better effectiveness.
About the Author:
Thinking about using a mig welder sometime in the future? You should visit Welding Supplies Direct for prices and information.
0 comments:
Post a Comment